Cisco TelePresence DX70 - About Disconnect Cause Types

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 200
Cisco TelePresence DX70 and DX80
API Reference Guide
About disconnect cause types
The following parameters are logged when a call is
disconnected. The disconnect cause types are used in
disconnect events (xEvent).
CauseValue Proprietary. We recomend the use of CauseType and CauseCode.
CauseType Describes why the call was disconnected. The value space is { OtherLocal, LocalDisconnect,
UnknownRemoteSite, LocalBusy, LocalReject, InsufficientSecurity, OtherRemote, RemoteDisconnect,
RemoteBusy, RemoteRejected, RemoteNoAnswer, CallForwarded, NetworkRejected }
CauseString Describes the Cause Code.
CauseCode The disconnect Cause Codes are defined in SIP and Q.850.
CauseOrigin SIP, Q.850, internal.
Example:
xEvent DisconnectEvent
*e CallDisconnect CauseValue: 1
CauseType: “LocalDisconnect”
CauseString: “”
OrigCallDirection: “outgoing”
RemoteURI: “firstname.lastname@company.com”
CallId: 89
CauseCode: 0
CauseOrigin: SIP
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

Appendices