EasyManuals Logo

Cisco TelePresence DX70 Reference Guide

Cisco TelePresence DX70
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #169 background imageLoading...
Page #169 background image
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 169
Cisco TelePresence DX70 and DX80
API Reference Guide
xStatus Network 1 CDP PrimaryMgmtAddress
Returns the management address used to configure and monitor the switch the endpoint is
connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP PrimaryMgmtAddress
*s Network 1 CDP PrimaryMgmtAddress: "10.1.1.2"
** end
xStatus Network 1 CDP SysName
Returns the SysName as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysName
*s Network 1 CDP SysName: ""
** end
xStatus Network 1 CDP SysObjectID
Returns the SysObjectID as configured in the switch the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP SysObjectID
*s Network 1 CDP SysObjectID: ""
** end
xStatus Network 1 CDP Version
Returns information about the software release version the switch is running.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network 1 CDP Version
*s Network 1 CDP Version: "Cisco IOS Software, C3560CX Software (C3560CX-
UNIVERSALK9-M), Version 15.2(3)E, RELEASE SOFTWARE (fc4)*Technical Support:
http://www.cisco.com/techsupport*Copyright (c) 1986-2014 by Cisco Systems,
Inc.*Compiled Sun 07-Dec-14 13:15 by prod _ rel _ team"
** end
xStatus Network 1 CDP VoIPApplianceVlanID
Identifies the VLAN used for VoIP traffic from the endpoint to the switch. For more information
see documentation of the IEEE 802.1Q protocol.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP VoIPApplianceVlanID
*s Network 1 CDP VoIPApplianceVlanID: "300"
** end
xStatus Network 1 CDP VTPMgmtDomain
Returns the switch’s configured VTP management domain name-string.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP VTPMgmtDomain
*s Network 1 CDP VTPMgmtDomain: "anyplace"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus

Table of Contents

Other manuals for Cisco TelePresence DX70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence DX70 and is the answer not in the manual?

Cisco TelePresence DX70 Specifications

General IconGeneral
BrandCisco
ModelTelePresence DX70
CategoryConference System
LanguageEnglish

Related product manuals