Cisco TelePresence DX70 - Xcommand Macros Runtime Stop; Message Commands; Xcommand Message Send

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 110
Cisco TelePresence DX70 and DX80
API Reference Guide
xCommand Macros Runtime Stop
Stops all of the macros set up on this device.
Requires user role: ADMIN
USAGE:
xCommand Macros Runtime Stop
Message commands
xCommand Message Send
Triggers a Message Send event which sends text to any listening clients.
Requires user role: ADMIN, INTEGRATOR
USAGE:
xCommand Message Send Text: "Te xt"
where
Text : String (0..255)
The text that the message contains.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand