Cisco TelePresence DX70 Reference Guide

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 89
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration Video Selfview OnCall Mode
This setting is used to switch on self-view for a short while when setting up a call. The Video
Selfview OnCall Duration setting determines for how long it remains on. This applies when self-
view in general is switched off.
Requires user role: ADMIN, INTEGRATOR
Default value: On
USAGE:
xConfiguration Video Selfview OnCall Mod e: Mode
where
Mode : Off/On
Off: Self-view is not shown automatically during call setup.
On: Self-view is shown automatically during call setup.
xConfiguration Video Selfview OnCall Duration
This setting only has an effect when the Video Selfview OnCall Mode setting is switched On. In
this case, the number of seconds set here determines for how long self-view is shown before it
is automatically switched off.
Requires user role: ADMIN, INTEGRATOR
Default value: 10
USAGE:
xConfiguration Video Selfview OnCall Duration: Duration
where
Duration : Integer (1..60)
Range: Choose for how long self-view remains on. The valid range is between 1 and 60
seconds.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration

Cisco TelePresence DX70 Specifications

General

Brand	Cisco
Model	TelePresence DX70
Category	Conference System
Language	English