Cisco TelePresence DX70 - Xconfiguration Usermanagement LDAP Admin Filter; Xconfiguration Usermanagement LDAP Admin Group; Xconfiguration Usermanagement LDAP Attribute

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 83
Cisco TelePresence DX70 and DX80
API Reference Guide
xConfiguration UserManagement LDAP Admin Filter
The LDAP filter is used to determine which users should be granted administrator privileges. If
set, this setting takes precedence over the UserManagement LDAP Admin Group setting.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Admin Filter: "Filter"
where
Filter : String (0, 1024)
Refer to the LDAP specification for the syntax of this string. Example: "(CN=adminuser)"
xConfiguration UserManagement LDAP Admin Group
Members of this AD (Active Directory) group will be given administrator access. This
setting is a shorthand for saying (memberOf:1.2.840.113556.1.4.1941:=<group name>). If
UserManagement LDAP Admin Filter is set, this setting is ignored.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Admin Group: "Group"
where
Group : String (0, 255)
The distinguishing name of the AD group. Example: "CN=admin_group, OU=company
groups, DC=company, DC=com"
xConfiguration UserManagement LDAP Attribute
The attribute used to map to the provided username. If not set, sAMAccountName is used.
Requires user role: ADMIN
Default value: ""
USAGE:
xConfiguration UserManagement LDAP Attribute: "Attribute"
where
Attribute : String (0, 255)
The attribute name.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xConfiguration