Cisco TelePresence DX70 - About Startup Scripts

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 197
Cisco TelePresence DX70 and DX80
API Reference Guide
About startup scripts
You can add one or more startup scripts to the codec.
A startup script contains commands (xCommand) and
configurations (xConfiguration) that will be executed as part
of the start up procedure every time the codec boots. A few
commands and configurations cannot be placed in a startup
script, e.g. xCommand SystemUnit Boot.
Use the codec’s web interface to create and manage startup
scripts.
Read more about the web interface and startup scripts in the
Administrator guide for your product.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

Appendices