EasyManuals Logo

Cisco TelePresence DX70 Reference Guide

Cisco TelePresence DX70
202 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 168
Cisco TelePresence DX70 and DX80
API Reference Guide
Network status
xStatus Network 1 CDP Address
Returns the first network address of both receiving and sending devices.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Address
*s Network 1 CDP Address: "192.0.1.20"
** end
xStatus Network 1 CDP Capabilities
Describes the functional capability for the switch in form of a device type. See documentation
for CDP protocol for more information.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Capabilities
*s Network 1 CDP Capabilities: "0x0029"
** end
xStatus Network 1 CDP DeviceId
Identifies the name of the switch in form of a character string.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP DeviceId
*s Network 1 CDP DeviceId: "123456.company.com"
** end
xStatus Network 1 CDP Duplex
Indicates the status (duplex configuration) of the CDP broadcast interface. Used by network
operators to diagnose connectivity problems between adjacent network elements.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Duplex
*s Network 1 CDP Duplex: "Full"
** end
xStatus Network 1 CDP Platform
Returns the hardware platform name of the switch connected to the endpoint.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP Platform
*s Network 1 CDP Platform: "cisco WS-C3750X-48P"
** end
xStatus Network 1 CDP PortID
Returns the identification the switch uses of the port the endpoint is connected to.
Requires user role: ADMIN, USER
Value space of the result returned:
String
Example:
xStatus Network CDP PortID
*s Network 1 CDP PortID: "GigabitEthernet1/0/23"
** end
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xSt atus

Table of Contents

Other manuals for Cisco TelePresence DX70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco TelePresence DX70 and is the answer not in the manual?

Cisco TelePresence DX70 Specifications

General IconGeneral
BrandCisco
ModelTelePresence DX70
CategoryConference System
LanguageEnglish

Related product manuals