Cisco TelePresence DX70 - Xcommand Userinterface Branding Upload; Xcommand Userinterface Extensions Clear; Xcommand Userinterface Extensions List; Xcommand Userinterface Extensions Set

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 128
Cisco TelePresence DX70 and DX80
API Reference Guide
xCommand UserInterface Branding Upload
Uploads a branding image to this device, which displays in the chosen area. This is a multiline
command.
Requires user role: ADMIN, INTEGRATOR, USER
USAGE:
xCommand UserInterface Branding Upload Ty pe: Type
where
Type : Literal (Background / Branding / HalfwakeBackground / HalfwakeBranding)
Specifies the area in which the uploaded image is to display.
xCommand UserInterface Extensions Clear
Delete all user interface extensions (widgets) from the video system.
Requires user role: ADMIN
USAGE:
xCommand UserInterface Extensions Clear
xCommand UserInterface Extensions List
List all user interface extensions (widgets) that exist on the video system.
Requires user role: INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Extensions List
xCommand UserInterface Extensions Set
Set the configuration scheme you have chosen in the user interface extensions (widgets)
for your room system. Updates the UserInterface Extensions status tree. This is a multiline
command.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL
USAGE:
xCommand UserInterface Extensions Set ConfigId: "ConfigId"
where
ConfigId : String (0, 40)
The unique identifier for the configuration.
xCommand UserInterface Extensions Widget Action
Sets the action of the given widget. Updates the UserInterface Extensions status tree.
Requires user role: ADMIN, INTEGRATOR, ROOMCONTROL, USER
USAGE:
xCommand UserInterface Extensions Widget Action [Ty pe: "Type"] [Value: "Value"]
WidgetId: "WidgetId"
where
Type : String (0..255)
The type of widget that is set.
Value : String (0..255)
The value of the widget. The range of values depends on the widget type.
WidgetId : String (0..40)
The unique identifier for the widget.
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

xCommand