Cisco TelePresence DX70 - Change Call Rate

D15363.05 Cisco TelePresence DX70 and DX80 API Reference Guide CE9.2, NOVEMBER 2017.
Copyright © 2017 Cisco Systems, Inc. All rights reserved. 14
Cisco TelePresence DX70 and DX80
API Reference Guide
System command changes in CE9.1
New commands
SystemUnit FirstTimeWizard Stop
UserInterface Extensions Set
Commands that are removed
None.
Commands that are modified
Audio Select
OLD: Device: Internal/HeadsetUSB/HeadsetAnalog/HandsetUSB
NEW: Device: Internal/HeadsetBluetooth/HeadsetUSB/HeadsetAnalog/HandsetUSB
Audio Volume Decrease
OLD: Device: Internal/HeadsetUSB/HeadsetAnalog/HandsetUSB
NEW: Device: Internal/HeadsetBluetooth/HeadsetUSB/HeadsetAnalog/HandsetUSB
Audio Volume Increase
OLD: Device: Internal/HeadsetUSB/HeadsetAnalog/HandsetUSB
NEW: Device: Internal/HeadsetBluetooth/HeadsetUSB/HeadsetAnalog/HandsetUSB
Audio Volume Set
OLD: Device: Internal/HeadsetUSB/HeadsetAnalog/HandsetUSB
NEW: Device: Internal/HeadsetBluetooth/HeadsetUSB/HeadsetAnalog/HandsetUSB
Audio Volume SetToDefault
OLD: Device: Internal/HeadsetUSB/HeadsetAnalog/HandsetUSB
NEW: Device: Internal/HeadsetBluetooth/HeadsetUSB/HeadsetAnalog/HandsetUSB
Dial
OLD: CallRate: Integer (64..6000)
NEW: CallRate: Integer (64..3072)
SystemUnit FactoryReset (All products)
OLD: Keep: LocalSetup/Network/Spark/Provisioning
NEW: Keep: LocalSetup/Network/Spark/Provisioning/SerialPort/Certificates (not in use)
Introduction
About the API
xConfiguration
Appendices
xCommand
xSt atus

Introduction