Cisco UCS C460 - Page 17

1-3
Cisco UCS C460 Server Installation and Service Guide
OL-22326-01
Chapter 1 Overview
Table 1-1 lists the features of the C460 server.
.
Ta b l e 1-1 Cisco UCS C460 Server Features
Chassis Four rack-unit (4RU) chassis
Processors • Cisco UCS C460 M1 server: Either 2 or 4 Intel Xeon 7500 Series processors.
• Cisco UCS C460 M2 server: Either 2 or 4 Intel E7-4800 or E7-8800 Series
processors.
Two-CPU configurations require 2 power supplies and 4-CPU configurations
require 4 power supplies.
Memory Up to 64 DIMMs
1
, populated in 8 slots on each of the 8 memory risers. 
Up to 512 GB of industry-standard DDR3
2
memory.
Multi-bit error
protection
This server supports multi-bit error protection.
Storage Up to twelve, 2.5” SAS
3
or SATA
4
hard drives or solid state drives.
Up to 6 TB of hot-pluggable storage.
Disk
Management
Factory-configured RAID
5
support options:
• RAID 0, 1, and 10 support for up to 8 SAS or SATA drives, with the optional
LSI MegaRAID SAS 9240-8i RAID controller
• RAID 0, 1, 5, 6, 10, 50, and 60 support for up to 12 SAS or SATA drives, with
the optional LSI MegaRAID SAS 9260-8i RAID controller
There is a dedicated SAS riser slot for the RAID controller card in the chassis. There
is also a mounting point inside the chassis for the optional RAID battery backup unit
that is available when using the LSI MegaRAID SAS 9260-8i controller.
See RAID Controller Considerations, page C-1 for more information.
PCIe I/O Ten PCIe
6
expansion slots, four hot-pluggable.
See Replacing a PCIe Card, page 3-38 for details.
InfiniBand The bus slots in this server support the InfiniBand architecture.