2-148
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
ip dhcp snooping information option allow-untrusted
Examples This example shows how to configure an access switch to not check the option-82 information in
untrusted packets from an edge switch and to accept the packets:
Switch(config)# ip dhcp snooping information option allow-untrusted
You can verify your settings by entering the show ip dhcp snooping privileged EXEC command.
Related Commands Command Description
show ip dhcp snooping Displays the DHCP snooping configuration.
show ip dhcp snooping binding Displays the DHCP snooping binding information.
To Next Page
Loading...
