A-19
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix A Catalyst 3560 Switch Boot Loader Commands
rmdir
rmdir
Use the rmdir boot loader command to remove one or more empty directories from the specified file
system.
rmdir filesystem:/directory-url ...
Syntax Description
Command Modes Boot loader
Command History
Usage Guidelines Directory names are case sensitive and limited to 45 characters between the slashes (/); the name cannot
contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons.
Before removing a directory, you must first delete all the files in the directory.
The switch prompts you for confirmation before deleting each directory.
Examples This example shows how to remove a directory:
switch: rmdir flash:Test
You can verify that the directory was deleted by entering the dir filesystem: boot loader command.
Related Commands
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
/directory-url Path (directory) and name of the empty directories to remove. Separate each
directory name with a space.
Release Modification
12.1(19)EA1 This command was introduced.
Command Description
dir Displays a list of files and directories on the specified file system.
mkdir Creates one or more new directories on the specified file system.
To Next Page
Loading...
Need help?
General