B-7
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix B Catalyst 3560 Switch Debug Commands
debug dot1x
debug dot1x
Use the debug dot1x privileged EXEC command to enable debugging of the 802.1x feature. Use the no
form of this command to disable debugging.
debug dot1x {all | errors | events | packets | registry | state-machine}
no debug dot1x {all | errors | events | packets | registry | state-machine}
Syntax Description
Note Though visible in the command-line help strings, the redundancy keyword is not supported.
Command Default Debugging is disabled.
Command Modes Privileged EXEC
Command History
Usage Guidelines The undebug dot1x command is the same as the no debug dot1x command.
all Display all 802.1x debug messages.
errors Display 802.1x error debug messages.
events Display 802.1x event debug messages.
packets Display 802.1x packet debug messages.
registry Display 802.1x registry invocation debug messages.
state-machine Display state-machine related-events debug messages.
Release Modification
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
Need help?
General