C-15
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix C Catalyst 3560 Switch Show Platform Commands
show platform ip unicast vrf tcam-label
show platform ip unicast vrf tcam-label
Use the show platform ip unicast vrf tcam-label privileged EXEC command to display PBR and
VRF-Lite labels and the number of labels in use by PBR.
show platform ip unicast vrf tcam-label [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(25)SEC This command was introduced.
To Next Page
Loading...
Need help?
General