A-9
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix A Catalyst 3560 Switch Boot Loader Commands
flash_init
flash_init
Use the flash_init boot loader command to initialize the flash file system.
flash_init
Syntax Description This command has no arguments or keywords.
Defaults The flash file system is automatically initialized during normal system operation.
Command Modes Boot loader
Command History
Usage Guidelines During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Release Modification
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
