2-27
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
boot manual
boot manual
Use the boot manual global configuration command to enable manually booting the switch during the
next boot cycle. Use the no form of this command to return to the default setting.
boot manual
no boot manual
Syntax Description This command has no arguments or keywords.
Defaults Manual booting is disabled.
Command Modes Global configuration
Command History
Usage Guidelines The next time you reboot the system, the switch is in boot loader mode, which is shown by the switch:
prompt. To boot the system, use the boot boot loader command, and specify the name of the bootable
image.
This command changes the setting of the MANUAL_BOOT environment variable. For more
information, see Appendix A, “Catalyst 3560 Switch Boot Loader Commands.”
Related Commands
Release Modification
12.1(19)EA1 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.
To Next Page
Loading...
Need help?
General