C-33
Catalyst 3560 Switch Command Reference
78-16405-05
Appendix C Catalyst 3560 Switch Show Platform Commands
show platform snmp counters
show platform snmp counters
Use the show platform snmp counters privileged EXEC command to display platform-dependent
Simple Network Management Protocol (SNMP) counter information.
show platform snmp counters [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with your technical support
representative while troubleshooting a problem. Do not use this command unless your technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.1(19)EA1 This command was introduced.
To Next Page
Loading...
Need help?
General