2-184
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
ipv6 mld snooping
Examples This example shows how to globally enable MLD snooping:
Switch(config)# ipv6 mld snooping
This example shows how to disable MLD snooping on a VLAN:
Switch(config)# no ipv6 mld snooping vlan 11
You can verify your settings by entering the show ipv6 mld snooping user EXEC command.
Related Commands Command Description
sdm prefer Configures an SDM template to optimize system
resources based on how the switch is being used.
show ipv6 mld snooping Displays MLD snooping configuration.