Cisco WS-C3560E-24PD-E User Manual

2-188
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
ipv6 mld snooping last-listener-query-interval
Examples This example shows how to globally set the last-listener query interval to 2 seconds:
Switch(config)# ipv6 mld snooping last-listener-query-interval 2000
This example shows how to set the last-listener query interval for VLAN 1 to 5.5 seconds:
Switch(config)# ipv6 mld snooping vlan 1 last-listener-query-interval 5500
You can verify your settings by entering the show ipv6 MLD snooping [vlan vlan-id] user EXEC
command.
Related Commands Command Description
ipv6 mld snooping last-listener-query-count Sets IPv6 MLD snooping last-listener query count.
sdm prefer Configures an SDM template to optimize system
resources based on how the switch is being used.
show ipv6 mld snooping querier Sets IPv6 MLD snooping last-listener query
interval.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English