Cisco WS-C3560E-24PD-E User Manual

2-192
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
ipv6 mld snooping robustness-variable
Examples This example shows how to configure the global robustness variable so that the switch sends out three
queries before it deletes a listener port that does not respond:
Switch(config)# ipv6 mld snooping robustness-variable 3
This example shows how to configure the robustness variable for VLAN 1. This value overrides the
global configuration for the VLAN:
Switch(config)# ipv6 mld snooping vlan 1 robustness-variable 1
You can verify your settings by entering the show ipv6 MLD snooping [vlan vlan-id] user EXEC
command.
Related Commands Command Description
ipv6 mld snooping last-listener-query-count Sets IPv6 MLD snooping last-listener query count.
sdm prefer Configures an SDM template to optimize system
resources based on how the switch is being used.
show ipv6 mld snooping Displays MLD snooping configuration.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English