2-438
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show ipc
This example shows how to display the contents of the IPC retransmission queue:
Switch> show ipc queue
There are 0 IPC messages waiting for acknowledgement in the transmit queue.
There are 0 IPC messages waiting for a response.
There are 0 IPC messages waiting for additional fragments.
There are 0 IPC messages currently on the IPC inboundQ.
Messages currently in use : 3
Message cache size : 1000
Maximum message cache usage : 1000
0 times message cache crossed 5000 [max]
Emergency messages currently in use : 0
There are 2 messages currently reserved for reply msg.
Inbound message queue depth 0
Zone inbound message queue depth 0
This example shows how to display all the IPC session statistics:
Switch# show ipc session all
Tx Sessions:
Port ID Type Name
10000.7 Unicast MDFS RP:Statistics
port_index = 0 type = Unreliable last sent = 0 last heard = 0
Msgs requested = 180 Msgs returned = 180
10000.8 Unicast Slot 1 :MDFS.control.RIL
port_index = 0 type = Reliable last sent = 0 last heard = 0
Msgs requested = 0 Msgs returned = 0
Rx Sessions:
Port ID Type Name
10000.7 Unicast MDFS RP:Statistics
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
No of msgs requested = 180 Msgs returned = 180
10000.8 Unicast Slot 1 :MDFS.control.RIL
port_index = 0 seat_id = 0x10000 last sent = 0 last heard = 0
No of msgs requested = 0 Msgs returned = 0
To Next Page
Loading...
Need help?
General