2-441
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
show ipv6 access-list
Related Commands
eq An equal operand that compares the source or destination ports of TCP or
UDP packets.
bgp (matches) Border Gateway Protocol. The protocol type that the packet is equal to and
the number of matches.
sequence 10 Sequence in which an incoming packet is compared to lines in an access
list. Access list lines are ordered from first priority (lowest number, for
example, 10) to last priority (highest number, for example, 80).
Table 2-26 show ipv6 access-list Field Descriptions (continued)
Field Description
Command Description
clear ipv6 access-list Resets the IPv6 access list match counters.
ipv6 access-list Defines an IPv6 access list and puts the switch into IPv6 access-list
configuration mode.
sdm prefer Configures an SDM template to optimize system resources based on how the
switch is being used.
To Next Page
Loading...
Need help?
General