Citizen CL-E321 User Manual

31
——
6. Make sure the media is in abutment with the left media guide and then adjust the posi-
tion of the right media guide in accordance with the media width.
From the front of the printer, set in front of the edge of media by approximately 10 mm.
CAUTION
Too much abutment force of the right movable paper guide may cause improper feeding of me-
dia, which may negatively impact print quality.

Citizen CL-E321 Specifications

General

Print Technology	Thermal Transfer / Direct Thermal
Resolution	203 dpi
Power Supply	100-240V AC, 50/60 Hz
Max Print Width	4.1 inches (104 mm)
Media Sensor	Transmissive and reflective sensor
Interface	USB, Serial (RS-232)
Media Width	1.97 to 4.33 inches (50 to 110 mm)
Supported Barcode Types	Code 39, Code 128, ITF, Codabar, UPC-A, UPC-E, EAN-8, EAN-13, POSTNET
Supported Media Types	Continuous, Die-cut
Media Thickness	0.0635 – 0.254 mm (2.5 - 10 mil)
Print Speed	Up to 8 inches per second