Citizen CT-S300 - GS F N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 155 -
GS f n
[Function] Selecting the font of HRI characters
[Code] <1D>H<66>H<n>
[Range] 0≤n≤2, 48≤n≤50
[Outline] [The specification which is common to the model]
• Selecting the font of HRI characters in printing bar code.
• The type of font can be selected with “n” as follows:
[The specification which depend on the model]
CT-S300/CT-S310/CT-S801/CT-S851/CT-S601/CT-S651/CT-P29x series
n
Font
0, 48
Font A (12×24)
1, 49
Font B (9 ×17)
2, 50
Font C (8 ×16)
CT-S280/CT-S281/CT-S2000/CT-S4000/CT-S301II/
CT-S801II/CT-S851II/CT-S601II/CT-S651II/CT-S251/CT-D150/CT-E351/CT-D151/CT-E651
n
Font
0, 48
Font A (12×24)
1, 49
Font B (9 ×24)
2, 50
Font C (8 ×16)
[Caution] [The specification which is common to the model]
• The HRI characters are printed at the position specified with GS H.
[Default] n=0
[See Also] GS H
[Sample Program] [Print Results]
LPRINT CHR$(&H1D);"h"; CHR$(50);
LPRINT CHR$(&H1D);"H"; CHR$(2);
LPRINT CHR$(&H1D);"f"; CHR$(0);
GOSUB BC
LPRINT CHR$(&H1D);"f"; CHR$(1);
GOSUB BC
END
BC:
LPRINT CHR$(&H1D);"k";
LPRINT CHR$(4);
LPRINT “12”; +CHR$(0);
LPRINT CHR$(&HA);
RETURN
* 1 2 *
* 1 2 *
FONT A
FONT B