Citizen CT-S300 - ESC? N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 77 -
ESC ? n
[Function] Deleting download characters
[Code] <1B>H<3F>H<n>
[Range] 32≤n≤126
[Outline] [The specification which is common to the model]
Deletes the downloaded characters of specified code.
[Caution] [The specification which is common to the model]
• The character “n” indicates the character code used to delete the defined pattern. After the deletion,
characters are printed in the same pattern as the internal characters.
• This command deletes the code-defined pattern of the character font selected by ESC !.
• This command is ignored if the specified character code is undefined.
[See Also] ESC &, ESC %