Citizen CT-S300 - Fn=67: Function 67 Setting Module Width of PDF417; Fn=68: Function 68 Setting the Height of Step of PDF417

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 371 -
fn=67: Function 67 Setting module width of PDF417
GS ( k pL pH cn fn n
[Code] <1D>H<28>H<6B>H<pL><pH><cn><fn><n>
[Range] (pL+pH×256)=3 (pL=3, pH=0)
cn=48
fn=67
2≤n≤8
[Outline] [The specification which is common to the model]
• Sets the width of one module of PDF417 to n dots.
[Default] n=3
fn=68: Function 68 Setting the height of step of PDF417
GS ( k pL pH cn fn n
[Code] <1D>H<28>H<6B>H<pL><pH><cn><fn><n>
[Range] (pL+pH×256)=3 (pL=3, pH=0)
cn=48
fn=68
2≤n≤8
[Outline] [The specification which is common to the model]
• Sets the height of the step of PDF417 to [Module width (Function 67) x n] .
[Default] n=3