Citizen CT-S300 - FF (Valid Only for Black Mark;Label Specification)

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 65 -
FF (valid only for Black mark/Label specification)
[Function] At selection of Black mark/Label paper (valid only for Black mark/Label specification)
[Outline] [The specification which is common to the model]
• This command prints the data in the printer buffer and searches for the head of the next Black mark/Label
(Black mark position/Top of label)
[Caution] [The specification which is common to the model]
• This command does not execute a paper cut.
• After this command is executed, the beginning of the line is taken as the start position for the next print.
• Valid only for label- or BM-supported model.
(Please confirm specifications for the details.)
[See Also] GS FF