Citizen CT-S300 - ESC G N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 79 -
ESC G n
[Function] Specifying/canceling double strike printing
[Code] <1B>H<47>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• Specifying /canceling the double strike printing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Function
0
Canceling double strike printing
1
Specifying double strike printing
[Caution] [The specification which is common to the model]
• With this printer, double-strike printing and emphasis printing provide completely the same
results.
• Valid for all character types except HRI characters.
[Default] n=0
[See Also] ESC E
[Sample Program] [Print Results]
LPRINT CHR$(&H1B);"G"; CHR$(0);
LPRINT "AAABBB"; CHR$(&HA);
LPRINT CHR$(&H1B);"G"; CHR$(1);
LPRINT "AAABBB"; CHR$(&HA);
ＡＡＡＢＢＢ Double strike printing canceled
ＡＡＡＢＢＢ Double strike printing specified