- 61 -
2.2 Command Details
2.2.1 Description of Items
XXXX
[Function] The name of a command.
[Code] The string of codes comprising the command is represented by < >H for hexadecimal numbers, < >B for binary
numbers, and < > for decimal numbers, [ ] k denotes the number of repetition of “k” times.
[Range] Indicates the values (setting range) of arguments of the command.
Note: If values outside the defined domain specified with control codes are used, malfunctions could
possibly occur, so be sure to use the values within the defined domain.
*The defined domain may differ depending on the model or printer setting.
[Outline] [The specification which is common to the model]
Indicates command functions common to relevant models.
[The specification which depend on the model]
Indicates the command function dependent on the model.
[Caution] Describes important points and cautionary notes, as required.
[Default] Initial values for the command if it has arguments.
[See Also] Describes commands related to the command when it is used.
[Sample Program]
Describes examples of coding on Quick-Basic.
* Examples are only for reference. They may vary depending on language and version. For details, please refer to a manual
in your language.
[Print Results]
Describes the print results obtained by executing the above programs. However, the print results shown are different in scale
from actual print results
To Next Page
Loading...
