Citizen CT-S300 - 2-Dimensional Code Commands

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 368 -
2.2.17 2-dimensional code Commands
GS ( k pL pH cn fn [parameter]
[Function] Setting and printing 2-dimensional code
[Outline] [The specification which is common to the model]
• Executes processing specified by function code (fn) with the 2-dimensional code
specified by cn.
• 2-dimensional codes selectable with the value of cn are shown below.
cn
2-dimensional code
48
PDF417
49
QRCode
[The specification which depend on the model]
CT-S801(II)/CT-S851(II)/CT-S601(II)/CT-S651(II)/CT-S310II/CT-S251/CT-D150/CT-E351/
CT-D151/CT-E651
cn
2-dimensional code
48
PDF417
49
QRCode
51
GS1 DataBar
• Executes various processing related to 2-dimensional code specified by fn.
cn fn Code
Function
No.
Function
48
65
GS ( k pL pH cn fn n
Function65
Sets the number of digits of PDF417.
66
GS ( k pL pH cn fn n
Function66
Sets the number of steps of PDF417.
67
GS ( k pL pH cn fn n
Function67
Sets the module width of PDF417.
68
GS ( k pL pH cn fn n
Function68
Sets the height of the step of PDF417.
69
GS ( k pL pH cn fn m n
Function69
Sets error correction level of PDF417.
70
GS ( k pL pH cn fn m
Function70
Sets the option of PDF417.
80
GS ( k pL pH cn fn m
d1 … dk
Function80
Stores received PDF417 data to
2-dimensional code data storage area
*.
81 GS ( k pL pH cn fn m Function81
Prints PDF417 data* of 2-dimensional
code data storage area.
cn fn Code
Function
No.
Function
49
65
GS ( k pL pH cn fn n1 n2
Function165
Specifies QRCode model.
67
GS ( k pL pH cn fn n
Function167
Sets the size of QRCode module.
69
GS ( k pL pH cn fn n
Function169
Sets error correction level of QRCode.
80
GS ( k pL pH cn fn m
d1 … dk
Function180
Stores received QRCode data to
2-dimensional code data storage area.
81 GS ( k pL pH cn fn m Function181
Prints QRCode data in 2-dimensional
code data storage area.