Citizen CT-S300 - Fn=48: Function 48 Selects Character Color

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 367 -
GS ( N pL pH fn m
[Function] Designating font attribute
[Outline] [The specification which is common to the model]
• Executes processing of font attribute by the specified fn value.
fn
Function
48
Selects character color.
fn=48: Function 48 Selects character color
GS ( N pL pH fn m
[Code] <1D>H<28>H<4E>H<pL><pH><fn><m>
[Range] (pL+pH×256)=2 (pL=2, pH=0)
fn=48
m=49 (At single color paper setting)
m=49, 50 (At 2-color paper setting)
[Default] m=49
[Outline] [The specification which is common to the model]
• Prints the succeeding characters with the energy set in m.
m
Function
49
High energy
50
Low energy