Citizen CT-S300 - GS B N

Support
model
CT-S280
CT-S300
CT-S2000
CT-S4000
CT-S251
CT-D150/E351
CT-S281
CT-S310
CT-S801/851
CT-S601/651
CT-P29x series
CT-S310II
CT-D151/E651
- 93 -
GS b n
[Function] Specifying/canceling the smoothing
[Code] <1D>H<62>H<n>
[Range] 0≤n≤255
[Outline] [The specification which is common to the model]
• This command specifies or cancels the smoothing.
• “n” is valid only for the lowest bit (n0).
• Control by the lowest bit (n0) is shown as follows:
n0
Function
0
The smoothing is canceled.
1
The smoothing is specified.
[Caution] [The specification which is common to the model]
• Smoothing is effective to printer’s internal characters, download characters, and non-standard
characters.
• Smoothing is not effective to characters with either of their vertical or horizontal magnification is x1.
[Default] n=0
[See Also] ESC! , GS !