What to do if my Citizen CT-S300 is not printing?
If your Citizen Printer is not printing, it could be due to: * Faulty DC output voltage from the AC adapter: Use the specified AC adapter. * Faulty control PCB assy: Replace the control PCB assy. * Faulty connection of the thermal head connector: Connect the thermal head connector properly, or replace the head cable assembly. * Faulty thermal head: Replace the thermal head.
Why is my Citizen CT-S300 Printer paper not fed or fed irregularly?
Irregular paper feeding in your Citizen Printer can occur due to several reasons: * Faulty connection of the motor connector: Ensure the connector is correctly connected. * Defective motor: If the supply voltage is normal, the motor might be defective and needs replacement. * Faulty or low DC output voltage from the AC adapter: Use the specified AC adapter or supply the specified AC voltage to the AC adapter. * Faulty control PCB assy: Replace the control PCB assy. * Faulty mounting of the platen roller: Ensure the platen roller is properly mounted. * Paper feed failure: Eliminate unnecessary paper in the paper path and set paper properly. * Foreign substance in the gear: Eliminate the foreign substance. * Broken gear: Replace the broken gear with a new one.
What to do if my Citizen CT-S300 Printer has faint or uneven printout?
A faint or uneven printout from your Citizen Printer may be due to: * Faulty DC output voltage from the AC adapter: Use the specified AC adapter. * Low DC output voltage from the AC adapter: Supply the specified AC voltage to the AC adapter. * Faulty thermal head: Replace the thermal head. * Foreign substance adhered to the thermal head: Dip a cotton swab or soft cloth in ethyl alcohol and gently wipe the foreign substances. * Non-recommended paper: Replace the paper with the specified paper. * Faulty mounting of the platen roller: Mount the platen roller properly.
What to do if my Citizen Printer is partly not printed?
If your Citizen Printer is only partly printing, it may be caused by: * Faulty connection of the thermal head connector: Connect the thermal head connector properly, or replace the head cable assembly. * Faulty thermal head: Replace the thermal head.
What to do if my Citizen Printer does not detect paper presence?
If your Citizen Printer fails to detect the presence of paper, check these possible causes: * Faulty paper sensor: Replace the sensor PCB assembly. * Foreign substance is attached to the paper sensor: Remove the foreign substance. * Faulty connection of the paper sensor connector: Connect the connector correctly.
What to do if my Citizen CT-S300 Printer doesn't detect paper near-end status?
If your Citizen Printer does not detect the paper near-end status, consider the following: * Faulty paper near-end sensor: Replace the paper near-end sensor. * Foreign substance is attached to the paper near-end sensor: Remove the foreign substance. * Faulty connection of the paper near-end sensor connector: Connect the connector correctly.
What to do if my Citizen Printer cutter does not function?
If the cutter on your Citizen Printer isn't working, check the following: * Faulty connection of the auto cutter connector: Connect the connector correctly. * Faulty DC output voltage from the AC adapter: Use the specified AC adapter. * Defective auto cutter: If the supply voltage is normal, replace the auto cutter. * Paper feed failure (Paper jam): Eliminate unnecessary paper in the paper path and set paper properly.
How to fix no power issue on Citizen Printer?
If your Citizen Printer has no power and the POWER lamp is not illuminated, it could be due to: * The AC adapter is not connected: Connect the specified AC adapter. * The fuse is gone: Use the specified AC adapter. * Fuse issue: Use the specified fuse.
What to do if my Citizen Printer immediately blows fuses after replacement?
To Next Page
General