- 45 -
Line Feed Span Commands
Specifying initial line feed rate
･
Setting line feed rate of minimum pitch
･
Bit Image Commands
Specifying the bit image mode
･
Defining the download bit image
･
Printing the downloaded bit image
･
Printing of raster bit image
Status Commands
Sending status in real-time
･
・
Enabling/disabling ASB (Automatic Status Back)
･
･
Paper Detecting Commands
Selecting the Paper Sensor valid for Paper-end signal output
･
Selecting the Paper Near-end Sensor valid for print stop
･
Panel Switch Commands
Enabling/disabling the panel switches
･
Macro Commands
Starting/ending macro definition
･
･
Cutter Commands
・
・
・
Bar Code Commands
Selecting of printing position of HRI characters
･
Selecting the font of HRI characters
･
Specifying the height of the bar code
･
･
Specifying the horizontal size (magnification) of bar code
･
Commands for Non-volatile Memory
Printing the download NV bit images
Defining the download NV bit image
To Next Page
Loading...
