Sam
ple Automatic Mode Meter Display
The screen will be similar to that for manual mode as described earlier.
However there are a number of extra features denoted as follow:-
I
st
line (18) – Product number
2
nd
line (Toaster) - the Test type
3
rd
line denotes the Test code Sequence number, in this case it has
only one level setup. A maximum of 5 levels could be setup.
4
th
line denotes the specific test of a repeat loop being done. Shown
here 1/5 means 1
st
test of FIVE test loops being carried out. This
corresponds to the circular icon with a number in the centre as
mentioned in Default sequence description.
⊕
1 ⊕ (Hal 102) This denotes the active terminal output channel pairs
that the test voltage will conducted to.
Sample Automatic Mode Meter Display
To Next Page
Loading...
