Clarion NX501E - Navigate to a Location Stored in a Photo

50NX501E/NZ501EEnglish
3.1.8Navigatetoalocationstoredinaphoto
Youcanalsosetthelocationstoredinaphotoasyourdestination.Doasfollows:
1. IfyouareontheMapscreen,tap
toreturntotheNavigation
menu.
2. IntheNavigationmenu,tap
.
3. Openthe
menuandtap .
4. Thelistofphotosstoredinthedeviceappears.Selectonephotofromthelist.
5. Afullscreenmapappearswiththeselectedpointinthemiddle.Ifnecessary,tapthe
mapsomewhereelsetomodifythedestination.TheCursor(
)appearsatthe
newlocation.Tap
toconfirmthedestination,ortap
toselectadifferentdestination.
6. Afterashortsummaryoftherouteparameters,themapappearsshowingtheentire
route.Therouteisautomaticallycalculated.Tap
tomodifyroute
parameters,ortap
andstartyourjourney.
Note!
OnlygeotaggedJPGfilescontainloc ationinformation.Thatiswhythesekindo
f
filescanonlybeusedinnavigation.Otherpicturefilesdonotappearinthelist.
FilesmustbelocatedonaninsertedSDcardorUSBpendrive,eitherintheroo
t
folderorina"pictures"folder.