Clarion NX501E - Building a Route from the List of Destinations (Create Route); Viewing the Entire Route on the Map

NX501E/NZ501EEnglish51
3.1.9Buildingaroutefromthelistofdestinations(CreateRoute)
YoucanalsobuildyourroutedestinationbydestinationfromtheMyRoutemenu.
1. IfyouareontheMapscreen,tap
toreturntotheNavigation
menu.
2. IntheNavigationmenu,tap
.
3. Tap
.
4. Thereisonlyonelineinthelistofroutepoints,thestartpointoftheroute,normallythe
currentGPSposition.
5. Tap
toselectthedestination.
6. TheDestinationmenuappearsandyoucanselectthedestinationoftheroutethe
samewayasdescribedintheprevioussections.
7. Whenthenewdestinationisselected,thelistreturn s.
8. Toaddmoredestinations,tap whereyouwanttoinsertthenewroutepointin
thelist,andrepeattheaboveprocedure.
3.2Viewingtheentirerouteonthemap
Itiseasytogetamapoverviewoftheactiveroute.Doasfollows: