Introduction
1-10
750-382
CBT
1.6 — Optional equipment
Certain options are available for the Model CBT Boiler; normally these will have been specified at the time of
order entry. In addition, some options may have been provided (by others) that are not part of Cleaver-Brooks
scope of supply. In either case, the Cleaver-Brooks authorized representative should be consulted regarding
specific project requirements.
Model CBT optional features:
• Gas pressure regulator (>1/2 psig supply)
• Gas pressure relief valve (>1 psig supply)
• Minimum Temperature/Warm Standby
• Direct vent kit combustion air adapter
• Chemical feed system
• Surface blow-off conductivity control
• Feedwater system (includes tank, pump, and control) - shipped separately
• Feedwater valves
• Blowdown valves
• Steam header valves
• High water alarm
• Time clock for setback control
• Stack temperature limit control
• Stack thermometer
• Alarm horn
• Lead-Lag steam pressure header transmitter
• Feedwater sets and condensate receivers
• Blowdown separators and tanks
• Economizers
• Complete steam skid or field-installed solutions
• Factory mounted valves
• Communications gateway
• Boiler Monitor (remote connectivity)
To Next Page