Climate Technologies Touch Pad Control - Program and Clock Setup

Multi-Appliance Touch Pad
PNE2004 Series Control
Page 31
Ducted Eva
p
orative Air Conditionin
g
Setup
In the SETUP outline, there are 2 setup mode icons and 4 function icons. To enter setup mode, touch
anywhere within the SETUP outline. The accessible icons will be displayed.
Review
Review is a feature that allows you to first view the current program settings. Each step remains visible for
3 seconds.
Once the review procedure has started the FINISH icon will be illuminated. The FINISH icon can be used
to stop the REVIEW process.
P
ROGRAM SETUP
Program setup will take you through the steps to set
your evaporative air conditioner.
Step 1 To select the PGRM (Program) mode touch
anywhere in the SETUP outline.
Step 2 Press PGRM. The 3 icons will disappear and edit
mode has begun with the 1
st
period.
Step 3 Two new icons will now be displayed ENTER &
CANCEL.
• ENTER will save each step of the program
• CANCEL will STEP back the program 1 step
at a time.
Step 4 The first period will be displayed with ON or OFF.
Using the arrows make a
selection and press ENTER.
Step 5 Set the Hour using the UP DOWN arrows and
press ENTER
Step 6 Set the Minutes using the
arrows and Press ENTER
Step 7 Select the MODE of operation and press ENTER.
Accessable Icons