Multi-Appliance Touch Pad Control
PNE2002 Series Control
Page 18
Ducted Gas Central Heatin
Step 11 Program the second period using steps 4 to 9
Step 12 If only 2 program periods are required press
FINISH. If a 3
rd
period is required program
using steps 4 to 9.
Step 13 If only 3 program periods are required press
FINISH. If a 4
th
period is required program
using steps 4 to 9 and press FINISH.
Note: To start the program, touch the mode outline area
for the available icons to be displayed. Press
PRGM and make solid. The icons will flash 3
more times and program mode will be engaged.
Reviewing Entered Programs
REVIEW is a feature that allows you to first view the current program
settings. Each step remains visible for 3 seconds.
Once the review procedure has started the FINISH icon will be illuminated.
The FINISH icon can be used to stop the REVIEW process.
O
PERATING PROGRAM MODE (PGRM)
Activates the 4 program x 7 day / night timer.
To operate the PGRM mode:
Step 1 Turn the Touch Pad on, press and release the
ON/OFF button. If there is only a central
heater HEAT will automatically display in the
Appliance area.
Step 2 Press the MODE outline. The available icons
will flash. Select PGRM .
The icon will become solid and the remaining
icons will flash 3 more times before
disappearing.
The touchpad will now be in program mode with the current program settings being indicated e.g.
time period, mode of operation, period and settings.
Step 3 To exit the PGRM mode you have 2 options.
1. Turn the unit off using the ON OFF button
2. Press the MODE area. The available icons will flash. Select a new mode of operation.
Default Setup Ducted Gas Central Heating
Program
Period ON/OFF Start Time Mode
1 ON 6:00 am THERM
2 OFF 9:00 am -
3 ON 4:00 pm THERM
4 OFF 10:00 pm -
To Next Page
Loading...