Climate Technologies Touch Pad Control - MODE - Operating Your Appliance in Your Preferred Mode

Multi-Appliance Touch Pad Control
PNE2002 Series Control
Page 8
Navi
g
atin
g
the Controls
Mode / Icon Options
To view the MODE options available press the touch
pad anywhere within the MODE outline. The available
functions will be dependent on the products installed.
MODE -
OPERATING YOUR APPLIANCE IN YOUR PREFERRED MODE
• COOL – Evaporative Air Conditioning Only
Fan and Pump in manual mode. This means the fan can be adjusted manually via the UP
/ DOWN arrows and the pump operates continuously.
• BOOST – Ducted Gas Central Heating and Evaporative Air Conditioning Only
The room air fan will operate at maximum speed.
• PGRM - Ducted Gas Central Heating, Evaporative Air Conditioning, Addon Air Conditioning
The unit can be set up in Program Mode to turn the unit ON and OFF in the desired mode.
For ducted heating and addon refrigeration this is a 7-day program.
For ducted evaporative air conditioning this is a 1-day (24-hour) program.
• FAN – Ducted Heating and Evaporative Air Conditioning.
Fan only in manual mode This means the fan only can be run and adjusted via the UP /
DOWN arrows.
In Addon cooling mode the fan will run continuously while the condenser cycles ON and
OFF
• THERM – Ducted Gas Central Heating, Evaporative Air Conditioning, Addon Air Conditioning
Thermostat mode will control the unit via a temperature sensor located inside the touchpad
itself.
Set the comfort level and the unit will automatically increase or decrease the amount of
heating or cooling required according to demand.
Adjust the comfort level using the UP / DOWN arrows
• ECON – Ducted Gas Central Heating Only
Economy will run a ducted gas central heater at the lowest available fan speed and gas
setting
Ducted Gas Heating
Available Icons HEAT
Appliance
Ducted Evaporative A/C
Available Icons
COOL Appliance
Addon Refrigeration. A/C
Available Icons
COOL Appliance