MAN.161 Rev.7 ENG - Use and maintenance manual S15 page
2
of
71
0.2
Disclaimer
C.M.C. declines all responsibility in case of partial or total non-observance
of the following instructions
Before any operation of use of the machine, the user is obliged to
carefully read the text of this manual, with reference to sections rel-
ative to specific work activity to perform.
The use of the machine must be entrusted only to trained and au-
thorized staff. This manual cannot replace in any way a suitable ex-
perience that the staff in charge must have gained previously on
similar machines or that they will able to get on this machine, under
the guidance of an already trained staff.
The user must work within the functional limits of the machine and
perform a constant and diligent maintenance, using only original
spare parts indicated by C.M.C.
The operator shall carefully know the safety standards foreseen by
national and international legislations and apply them during all op-
erations with the MEWP.
The guarantee of proper functioning and full compliance of
the machine with the intended service is strictly dependent
on the correct application of all the instructions contained in
this manual.
The non-compliance with the previous items automatically in-
validates the warranty.
0.3
Where and how to store the manual
The manual must be stored and kept in the best possible con-
dition (away from sunlight), in a suitable place, for the purpose
of always being available for consultation.
This manual (or its copy) must always be on the machine (in a
case near the turret) for an immediate consultation by the operator
during working operations.
Another copy shall be hold by the basket operator during the
working period inside the internal documents case.
In case of loss or deterioration, the replacement documenta-
tion must be requested to C.M.C. s.r.l, citing the code of this
manual.
0.4
Regulatory references
This manual has been drawn up according to the following na-
tional and international laws and directives:
Directive 2006/42/CE ISO 3864 EN 280:2015
Directive 93/68/CEE ISO 4302 EN 349
ISO 12100 ISO 4305 EN 60068-2-64
ISO 13849-1-2 ISO 4309 EN 60204-1-32
ISO 13850-13854 ISO 20381 EN 60529
ISO 13857 EN 13001 EN 62061
ANSI/SAIA A92.20-2018 ANSI/SAIA A92.24-2018 ANSI 92.6-2006
ANSI/SAIA A92.22-2018 ANSI Z359.1 CSA 354.1-2006
To Next Page
Loading...
Need help?
General
