COBHAM D-MBR 3707 User Manual

D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 17-Jan-16
www.cobham.com/wireless
Doc. No.00060CDUM Rev. 1.1 Page | 13
3 BOOSTER MOUNTING AND INSTALLATION
This chapter describes the installation of the D-MBR 3707-3708 PS NFPA booster. For installations
that include the Feeder and Battery Charger, refer to Chapter-4 for the installations instructions.
NOTE: If included in the installation), the Battery Charger is installed adjacent to the Booster. Refer
to chapter 4 for instructions on installing the Battery Charger.
WARNINGS!!!
• Follow all local safety regulations when installing the Signal Booster and Char.
• Only qualified personnel are authorized to install and maintain the Signal Booster.
• Follow Electro-Static Discharge (ESD) precautions.
3.1 Booster Installation Overview
The Booster installation procedure consists of the following steps.
Figure 3-1 Physical Installation Workflow
Step-1
• Choosing Installation Location
Step-2
• Unpacking
Step-3
• Wall or Rack Mounting
Step-4
• Grounding
Step-5
• Power Connections
Step-6
• Connection to External Battery
Step-7
• Alarm connections

COBHAM D-MBR 3707 Specifications

General

Brand	COBHAM
Model	D-MBR 3707
Category	Extender
Language	English