COBHAM D-MBR 3707 - Setup and Commissioning; Overview of the Commissioning Procedure

D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless
Date: 17-Jan-16
Cobham Wireless – Coverage
Page | 38 Rev. 1.1 Doc. No.00060CDUM
5 SETUP AND COMMISSIONING
This section describes the setup procedures for the D-MBR Booster.
5.1 Overview of the Commissioning Procedure
The Booster is designed for simple plug-and-play operation, only requiring the setup of a number of
parameters via a local Web connection and verifying that the system is operating properly.
Figure 5-1 Commissioning Overview
Step-1
• Open a local session
Step-2
• RF Parameters
Step-3
• Date and Time
Step-4
• External Alarms Config
Step-5
• IP Address
Step-6
• Password Change