D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless
Date: 17-Jan-16
Cobham Wireless – Coverage
Page | 58 Rev. 1.1 Doc. No.00060CDUM
6.3.2 Backup Band Configuration
To backup the current configuration
1. In the left pane, click the 700-800 item and then click the Backup/Restore tab.
2. To assign the configuration file a recognizable name, enter a name in the remark field.
Otherwise, the file will be assigned a name by the system.
3. Click the Backup button located on the right-hand side of the tab.
4. The file will be added to the table displayed in the Backup/Restore tab.
Note: The file name (under File) is a link that enables uploading the file to another location.
Figure 6-6. Backup Booster Info
6.3.3 Restoring Band Configuration
To restore previous configuration
1. In the left pane, click the 700-800 item and then click the Backup/Restore tab.
2. Select the required configuration file (enable corresponding radio button) from the available list
in the Backup/Restore tab.
3. Click the Restore button.
Figure 6-7. Restore Band Configuration
4. Click on the Control and Params tab and verify that the required configuration settings have
been restored.
To Next Page
Loading...
General