D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless
Date: 17-Jan-16
Cobham Wireless – Coverage
Page | 12 Rev. 1.1 Doc. No.00060CDUM
2.5 RF Cable Installation Guidelines
Note the following:
• For all coaxial connections to/from the Signal Booster - high performance, flexible, low loss 50
ohm coaxial communications cable.
• All cables shall be weather-resistant type.
• If the coaxial cables are NOT weather-resistant type: wrap the exterior coaxial cables with
insulation and holding tape (Type 3M Rubber splicing tape) for environmental protection and to
ensure longer lifetime.
• Cable length - determined by the Signal Booster installation plan. When calculating the cable
length, take into account excess cable slack so as not to limit the insertion paths.
To Next Page
Loading...