D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
www.cobham.com/wireless
Date: 17-Jan-16
Cobham Wireless – Coverage
Page | 32 Rev. 1.1 Doc. No.00060CDUM
4.4.1 Charger Installation Location
The charger is installed
adjacent
to the Booster either on the wall or
vertically
in a rack.
Refer to section
2.4.1 for the relevant location criteria.
4.4.2 Charger Unpacking and Package Contents
Upon receiving the D-MBR-PS-NFPA Signal Booster, perform the following:
1. Examine the shipping container for damage before unpacking the unit.
2. Perform a visual inspection to reveal any physical damage to the equipment.
3. Verify that all of the items listed in the packing list are included. Otherwise contact your Cobham
Wireless service representative.
Battery Charger Package Contents
Battery Charger
CD containing User’s Manual
and USB driver
Mounting Brackets
1 x Alarms Connector
Circular 8 Pin (P/N 30WEC70500)
AC Cable
DC Connector and cable
To Next Page
Loading...
General