D-MBR 3707-3708 PS NFPA CLASS A SIGNAL BOOSTER
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage
Date: 17-Jan-16
www.cobham.com/wireless
Doc. No.00060CDUM Rev. 1.1 Page | 49
5.6 IP Address and SNMP Notifications
This section describes how to set up the booster’s IP Address and SNMP notifications management
To configure the IP Address and SNMP Notifications
1. Click on CMU in the left pane and select the Communication Configuration tab. The
following screen appears.
Figure 5-16. Communication Configuration Dialog
The following areas are relevant to this Booster installation.
Area Description
IP Configuration Used to define Static IP Address and DHCP Address.