COBHAM OMU I User Manual

OPTICAL MASTER UNIT MARK I
PRODUCT DESCRIPTION AND USER’S MANUAL
Cobham Wireless – Coverage Date: 4-Jan-18 www.cobham.com/wireless
Document number:A1829300UM Rev. 3.1
Page | 24
3.7 Set Up OMU-Repeater System
Install the
repeaters
Install the fibre fed repeaters. See the User’s Manual for the repeaters.
Install the fibres to
the repeaters
Make sure the fibre link between the OMU and all of the repeaters are
working.
Make sure all connectors in the link have APC type connectors.
Add all nodes to
the OMU-Repeater
System.
Select “System Nodes”
Chose “Add node…” from the “Node” drop down menu.
Fill in the information for each repeater in the pop up window.
Serial number
The serial number consists of 4 letter and/or
digits. It is printed on the yellow label on the
repeater
Bus number When OMUs are cascaded they run on different
buses. OMU 1 and OMU 3
is on “bus “0 and OMU
2 and OMU 4 in on” bus 1”..
Controller type Select the correct repeater controller based on the
illustrations

COBHAM OMU I Specifications

General

Brand	COBHAM
Model	OMU I
Category	Network Hardware
Language	English