Cocoon Cooltech - Apply Loctite 5331 Sealant

Apply Loctite 5331 sealant
Apply sealant to the plastic thread.
Reconnect the plastic fitting to the metal and tighten carefully using a wrench. Reconnect the tube.
In case the leak persists proceed with step 3:
Step 3
Step 3: Block the line at the other hose of the tank (tube with filter) and test the circuit from the return
connector of the tank to the pump.
If the leak has stopped, the problem has been is in the tank of the equipment. To solve it replace the
deposit. As a temporary solution make a bridge (explained in previous chapter).